If the gas boiler is a steam or hot water boiler in operation, continuous water supply is required to ensure the water capacity of the drum. Once water shortage occurs, it will cause the boiler dry burning problem and cause boiler failure and other problems. Then the gas boiler is running suddenly What are the corresponding measures for water cut treatment? What are the treatment methods for water shortage?

Gas boiler water cut-off treatment

　　1. When the boiler is shut down, the motor of the blower, induced draft fan, and grate reducer should be stopped according to the specified value when the boiler is at a low water level. If a serious water shortage has occurred, it cannot be supplied immediately, otherwise serious accidents will occur.

　　2. Feed water flow. When the gas boiler is short of water, the feed water flow should be less than the steam flow.

　　3. If the boiler tube or economizer tube ruptures and causes water shortage, the steam flow rate is large. At this time, it is not necessary to add water to the boiler.

Preventive measures for boiler water shortage

　　1. Water level gauge, do a good job in the maintenance of the boiler water level gauge to ensure that the scale of the water level gauge is clear and consistent with the water volume in the drum.

　　2. Ensure that the water pump and boiler feed water pump are in normal working condition, and do the daily maintenance work, such as head, pressure, etc.

　　The above is the knowledge related to the primary fan, and welcome online consultation for boiler issues.