The operation of the boiler is not only as simple as pressing the start or stop button. During this period, it is not only necessary to manually monitor, but also to ensure the normal operation of other aspects of the boiler. Then, what are the measures for the operation of gas boilers? What elements should operators pay attention to? Let’s learn about it with XinLi boiler.

Gas boiler operation measures

　　Measure 1: According to requirements, gas boilers should be operated in accordance with boiler operating standards after major inspections and maintenance, and cannot be overloaded or under-loaded, etc., to ensure that all protection devices of the boiler are in a normal state, and the size of the boiler can be affected. Prompt the failure in time.

　　The second measure is the furnace temperature. After the gas boiler is ignited, the temperature of the furnace should be observed. If the entire fuel oil enters the furnace and there is no fire after checking the fire, the furnace should be shut down in time and the furnace should be ventilated and purged again.

　　Measure three, approve the implementation, if the protection device itself fails and needs to be temporarily withdrawn from operation, the engineer should be consulted for operation and implementation.

　　Measure 4: After the gas-fired steam boiler is tripped or shut down normally, the furnace shall be ventilated and purged immediately, and the unburned combustible gas in the furnace shall be pumped away in time.

Boiler maintenance attention

　　Note 1: The boiler will wear, leak, corrode, burn out and other parts after long-term operation. It should be replaced and maintained in time according to the specifications.

　　Note 2: Boiler operators should strictly implement maintenance records in accordance with the boiler room system, and must not leave their posts without authorization while the boiler is in operation.

　　Attention three, ensure that the safety valve of the boiler can be opened and closed normally, and clean the carbon deposits and other maintenance in time for the burner of the boiler's core equipment after the heating period is over.