tel TEL:0086-371-55988930

email Email:[email protected]

xinli boiler

Home > News > What should I do if the gas boiler burner fails? How to do it properly?

What should I do if the gas boiler burner fails? How to do it properly?

2022-01-17      page view: 

  As the core equipment of the boiler, the failure of the burner directly affects the production efficiency. For this reason, the emergency treatment measures and methods for the daily boiler burner failure must have certain experience for the boiler operator. Then the gas boiler burner appears. What should I do if it fails? What is the treatment method? Let's learn about it with XinLi boiler.

Boiler burner failure and treatment

  1. Ignition rod, if there is a problem with the ignition rod of the burner, it will directly affect the operation. This is mostly because the ignition rod has carbon residue, oil stains, or cracks, moisture and leakage, resulting in normal ignition operation.

  Solution: Check carefully to eliminate the carbon residue, oil pollution and damage of the ignition rod one by one, and deal with them properly.

  2. The ignition cannot be ignited. The ignition rod looks normal but cannot be ignited. There are many reasons for this situation, such as poor ventilation, blockage, etc. of the cyclone plate, or the nozzle is stained, and the distance between the ignition rod and the nozzle is too large. Nearly, there is the design angle of the damper is too small and so on.

  Solution: clean the dirt and conduct a fine-tuning test ignition.

  3. The noise is large. If the noise of the burner is mostly the blockage of the oil circuit filter, the low oil temperature, the failure of the oil pump or the damage of the fan bearing, etc.

  Solution: Check one by one, clean the filter screen of the pump itself, and replace the damaged parts in time.

  4. The fire is small. If the small fire of the gas boiler is normal and turns to a large fire, it goes out or flickers unstable, etc. These may be because the boiler damper is set too large, and the oil nozzle is worn or dirty.

  Solution: gradually fine-tune the damper and carry out the ignition adjustment test to see if it meets the requirements, check whether the boiler nozzle is stained and clean it up.

gas boiler burner

Boiler burner maintenance benefits

  The first advantage is to improve the safety of the boiler. The burner is the core equipment for the efficient and normal operation of the boiler. Regular maintenance of the burner to ensure normal operation can greatly improve the safety factor of the boiler and reduce the occurrence of failures.

  The second advantage is to improve the energy saving of the boiler. Regular maintenance of the burner can promote the energy saving of the boiler and improve the thermal efficiency.

  The third benefit is to reduce pollutant emissions and maintain the burner well, which can better promote the full combustion of fuel, reduce nitrogen oxide emissions, and make the boiler meet the pollution discharge standards.

Related Products

More products >
Steam
Oil/Gas Fired Condensing Boiler