tel TEL:0086-371-55988930

email Email:[email protected]

xinli boiler

Home > News > How to reduce and avoid gas boiler failure problems?

How to reduce and avoid gas boiler failure problems?

2022-01-17      page view: 

  The boiler design structure is complex and the process requirements are high. In addition, if the operation is improper or non-standard in the later stage, it is easy to cause boiler failure. So how to reduce and avoid the failure of gas boilers? What do I need to pay attention to when running? Let's learn about it with XinLi boiler.

Measures to avoid boiler failure

  1. Pay attention to the purchase. There are many boiler manufacturers, and there are differences in material selection, manufacturing process and experience. For this reason, in order to prevent the boiler from being shut down due to failure in the later stage, the product quality performance of the boiler manufacturer and the later stage should be inspected in many aspects. service etc.

  2. Management system, no matter what type of boiler and its size, professional personnel should be arranged for operation management. Stokers should hold a certificate and have a certain ability to deal with sudden boiler failures. At the same time, they should do a good job in recording and handover work.

  3. Operation observation. After the boiler is ignited and running, it should be inspected from time to time to see if there is any abnormality in the boiler, and judgment and treatment should be made in time. If necessary, the boiler should be stopped for inspection.

  4. Maintenance, in order to reduce the failure rate of the boiler in the later stage, the boiler maintenance work should be done well, the damaged parts should be replaced in time, and the boiler sewage and water quality testing should be done regularly.

gas boiler

Boiler Operation Note

  Note 1: In standard operation, the boiler should not be operated in an overloaded environment. Overloading will not only easily cause the boiler to fail, but also reduce the service life of the boiler.

  Note 2: The debugging is in place. The new boiler should be debugged in place before running, and it can be ignited after meeting the requirements. In addition, it is necessary to ensure that the water supply and gas supply are normal, and the valve can be opened and closed normally.

  Note 3: Set parameters, do not change and set boiler operation parameters at will, and be familiar with boiler operation instructions and attention.

Related Products

More products >
Steam
Oil/Gas Fired Condensing Boiler