Gas boilers occupy a high number of civil and industrial sectors. The boilers not only have high thermal efficiency but also perform well in environmental protection. So what should be paid attention to when debugging newly installed boilers? What are the troubleshooting and troubleshooting? Let's learn about it with XinLi boiler.

Notes on commissioning of gas boilers

　　1. Pay attention to fuel. Before using the boiler, check whether the gas meets the specified requirements. Those that do not meet the specifications cannot be used. In addition, ensure that the gas supply pipes and valves are unobstructed and no leakage occurs.

　　2. Pay attention to the water supply. The boiler water supply system is complete and normal, meeting the boiler water standard and quality, and monitoring the water quality.

　　3. Control attention, gas boilers mostly use PLC control system, check whether the indicator lights, touch button start and stop, etc. are in normal state.

　　4. Debugging personnel, arrange debugging personnel reasonably, and check various tools required for debugging work. After debugging, check the inside and outside to prevent tool parts from falling.

Boiler failure inspection and treatment

　　Gas boilers have a high degree of intelligence, and are often equipped with alarm devices. They will prompt and store data statistics in time for boiler failures. The boiler operator can check and maintain according to the prompts. For other problems of the boiler, the operator may check in real time and make records and records. Handover.

Advantages of gas boilers

　　The wide application of gas boilers in the present is not only due to the transformation and upgrading of environmental pollution, but also has many connections with the technological development of the boiler industry. During the ignition operation of gas boilers, not only the emission of pollutants is low, but also the pollution to the atmospheric environment is reduced. The control also reduces the cost and time of manual operation and maintenance of the boiler. One-key start and stop can make efficient use of boiler fuel and reduce the insufficient fuel supply per unit time caused by manual feeding such as coal-fired and biomass boilers. Too much can lead to insufficient combustion or other problems.