1. Computerized hot water boiler controller, the boiler can be turned on with one button, fully automatic timing and constant temperature operation, the user can set the start and stop time, after the setting is completed, no special person is required to be on duty, saving trouble and effort.

1. Pay attention to the following points during the operation of the gas boiler: (1) Positive pressure combustion or smoke emission from the furnace is not allowed, because it is easy to burn out the coal filling hole cover.

As we all know, the two efficiencies of coal-fired heating systems (ie, boiler efficiency and pipe network transmission efficiency) are the keys to energy conservation. The energy saving of gas boiler heating should also follow this principle.

The working principle of the oil-gas boiler is actually simple. The general principle is based on fuel oil and gas as auxiliary. Before the boiler is ignited, the fuel oil switch must be turned on, and the gas switch must be kept closed at this time.

The degree of natural gas flue gas treatment is determined by local environmental protection requirements. The natural gas boiler itself emits less pollutants. For remote areas, ordinary gas boilers can operate normally. If the emission of nitrogen oxides is required, such as 30 mg per cubic meter The following needs to install low-nitrogen burners, economizers and other flue gas treatment measures.

The fuels required for the operation of gas-fired boilers include natural gas, coal-bed methane, city gas, and biogas. More fuels are used to supply pipeline gas for natural gas companies. Boiler companies can not only realize real-time gas supply, but also have great security in terms of safety. Gas boilers are ignited and burned efficiently through smart burners.

There are many methods for shutdown and maintenance of natural gas boilers. The details are as follows: 1. Desiccant method. After the boiler is shut down, the waste heat of the boiler is used to dry the interior to remove scale and slag. Finally, a desiccant is placed in the boiler to maintain the metal surface. Dry to prevent corrosion.

In terms of thermal efficiency, gas-fired boilers have outstanding performance among many types of condensing boilers. With the improvement of environmental protection requirements, boiler companies must meet pollutant emission regulations.